Language EnglishČesky

Traditional Czech production of solid-fuel household appliances

Solid-fuel range cooker 9112-HEU type

Traditional czech production of solid-fuel household appliances

Characteristics

The KVS MORAVIA 9112-HEU type solid-fuel range cooker with a heat exchange unit (exchanger) combines the advantages of an appliance designed for cooking, baking/roasting meals and a central heating boiler. Its spacious firebox makes it possible to use wood logs of up to 450 mm in length and of up to 190 mm in diameter. One of many other advantages is the variability of connections to a chimney.  

Already in its standard version, the cooker has 3 outlets for combustion gases for connection to a chimney from the back, from a side or from above (Note: when a glass-ceramic hob is used, connection is only possible from a side or back wall). All these outlets are situated next to one another – see the photo.

The cooker is made in right-hand or left-hand versions, which differ mainly by the position of the outlets into a chimney (when viewed from the front). Right-hand version – all the 3 outlets for combustion gases are in the right corner and the oven is also situated in the right section of the cooker. Left-hand version – all the 3 outlets for combustion gases are in the left corner, and the oven is also situated in the left section of the cooker.

Solid-fuel range cooker 9112-HEU type

Colouring of the stove


Note: The displaying of colours is only for informative purposes; it is limited by the technical parameters of individual computer monitors, and will not necessarily completely correspond to reality.

Stove diagram

Schéma

Photo gallery

Technical parameters

Space output: 5,5 kW
Water output: 3,5 – 8 kW
Hot-water heater capacity: 9 litrů
Hot-water heater outlets: 1“
Diameter of smoke collar: 120 mm
Cooker dimensions (w-h-d): 924 x 850 x 600 mm
Oven dimensions (w-h-d): 302 x 250 x 433 mm
Height of exhaust collar: 735 +- 5 mm (through the centre from the floor)
Minimum chimney draught: 12 Pa
Efficiency at rated heat output: 75 %
Weight: 175 kg
Recommended fuel: wood and wood briquettes
Hob design variants: cast iron + steel, steel ground, or glass-ceramic variant 

Technical description

The KVS MORAVIA 9112-HEU type range cooker is designed to be used mainly with a recommended fuel such as wood and wood briquettes. 

This cooker with a heat exchange unit (exchanger) combines the advantages of an appliance designed for cooking, baking/roasting meals and a central heating boiler. The cooker is also fascinating in that it is possible to see flickering flames through the glazed door of the firebox as in the case of a fireplace stove. The materials used in the manufacture of this type are similar as compared with the other types of KVS MORAVIA appliances.

It is designed in such a way to utilise its potential also for heating other rooms while maintaining the cooking and baking/roasting function. An appliance with a hot-water heater has greater service demands than appliances with no heater, and therefore it requires a higher frequency of fuel stoking and removal of ash from the grates during operation. It is not possible to set continuous burning operation. The appliance is suitable for heating rather small housing units and cottages.

The cooker has a rather spacious firebox at the expense of the baking oven, which is of smaller dimensions as compared with the types 9100 and 9103. Yet the oven works well and is equipped with a grid and baking tray. In view of the fact that this type has a large entrance door to the firebox, logs of up to 190 mm in diameter and 450 mm in length can be put into it. From this point of view, this type will be more suitable if you prefer heating to roasting/baking and cooking. 

The L-shaped heat exchange unit is positioned on the back and lateral side of the firebox (replacing fire bricks). The outlets for connection to the heating system of central heating are on the back side of the appliance. Owing to restricted space in the construction of the cooker, the heat exchange unit is of rather small dimensions, hence with a smaller water capacity. Therefore, we recommend connecting the cooker into a circuit with forced water circulation (with a pump).

The cooker is provided with secondary air supply which facilitates better combustion.

Cooling panels can be used to build the cooker into a fitted kitchen. If upper cabinets above the cooker are also part of the fitted kitchen, it is necessary to insulate them from heat and steam, e.g. by means of an extractor hood or in another way. Otherwise the fitted kitchen may get damaged. 

Other products offered by us

Solid-fuel range cooker 9100-HEU type


with a heat exchange unit (exchanger) combines the advantages of an appliance designed for cooking, baking/roasting meals and a central heating boiler.

  • High performance
  • A large oven with excellent baking/roasting capacity  
  • A glazed oven door equipped with a thermometer
  • Modern design
More information

Solid-fuel stove 9114-HEU type


with a heat exchange unit (exchanger) combines the advantages of an appliance designed for cooking, (re)-heating of meals and a central heating boiler.Solid-fuel stove – type 9114-HEU

  • High performance
  • Comfortable control of the flow of combustion products
  • A spacious firebox with a glazed door
  • Modern design
More information